EVO-Z is a self-acting, adjustable, non-electric thermostatic operator and remote temperature sensor. It has adjustable max./min. temperature, selected temperature locking feature and can be shutoff completely if required. The symbol * protects against frost damage. Each EVO-Z thermostatic operator is individually calibrated and conforms to ASHRAE standardization rules for temperature regulation. The EVO-Z’s smooth shape and narrow air gaps gives a nice operation and makes it easy to keep clean. They can be mounted on all Macon NT series valves.
-
The sensor on the EVO-Z is wax-filled and the wax volume varies according to ambient temperature. The volume changes are transmitted to the valve stem via a liquid capillary system. The valve body has a return spring which closes the valve when the stem is under low pressure. When the force from the sensor and the return spring are balanced to the room temperature selected, the valve disc stops in that position to allow a certain amount of water or steam to flow through the valve. Ambient temperature changes cause the valve disc to change position and thereby continuously modulate the flow so that the room temperature is maintained at the desired temperature. The unit is secured against damage from over-pressure by a built-in pressure absorbing spring.
-
Valve-mounted setting knob and remote temperature sensor
Brass sensor, High sensitivity
Fiberglass valve plug shaft
Stainless steel capillary tube, 6’6” standard length
Longer capillary available, consult factory
Fits all Macon NT series valves
Replaces the valve-mounted sensors on built-in convectors, etc., and where the valve-mounted sensor is exposed to draft from doors and windows
Fully automatic – nonelectric, no wiring
Manufactured to exacting standards using exceptionally high quality materials
Each sensor is tested and re-checked to achieve exact settings before leaving the factory
Note that changing the actuator can be accomplished without draining the system
All Macon thermostats can be locked at or limited to a specific temperature or temperature range
Simple one-trade installation
Sensor guard furnished at no extra cost
All Macon valves and thermostats conform to ASHRAE Standard 102P-1983 and European Standard EN 215/1215. We are also ISO 9001 certified (2002) and ISO 14001 certified (2002).
-
Temp. Range: 50° – 82°F
Hysteresis: 0.9°F
Heat Transfer: 1.1°F (Valve Housing Sensor)
Dead Time: 0.8 Minutes
Max. Differential Pressure: 20 psi
Sugg. Differential Pressure: 0.5 - 2.9 psi
Max. Water Temp.: 250°F
Max. Storage & Ambient Temp.: 122°F
Max. Steam Pressure: 15 psig
Max. Movement: 0.125 inches
Long Term Test: 5000 cycles (1.3°F)
-
-